HP Architecting Multi-site HP Storage Solutions Sample Questions:

1. A customer's network environment contains a third-party storage system and an HP BladeSystem with ProLiant server blades. The customer plans to migrate data to an HP StoreVirtual Storage System.
The storage system must contain at least 20 TB of raw capacity.
Which HP StoreVirtual Storage System should the customer deploy?

A) HP StoreVirtual 4130
B) HP StoreVirtual 4630
C) HP StoreVirtual 4330
D) HP StoreVirtual 4530

2. After talking with a sporting equipment manufacturer, you decide to propose a two-node HP 3PAR StoreServ 7400.
The manufacturer will use the following criteria to select the winning proposal:
-Approximately 4TB of performance data and 24TB of archive data -Most availability and performance for the price -Simple and easy to manage -Open to recommendations that provide significant cost savings without other impacts
Which configuration should you present, based on HP best practices?

A) 4 add on SFF Shelves with 26 x 300GB 15k and 1 LFF Shelf with 24 x 2TB NL
B) 4 add on SFF Shelves with 52 x 900GB 10k
C) 4 add on SFF Shelves with 8 x 100GB SSD and 98 x 450GB 10k
D) 3 add on LFF Shelves with 8 x 100GB SSD and 28 x 2TB NL

3. A customer has an environment spanning two datacenters in a campus environment. The primary storage is an HP 3PAR StoreServ 10400 Storage system. Data is replicated between sites with and RPO of zero.
There has recently been a hurricane and extensive flooding. While the customer was not directly impacted, they are now questioning whether they have adequate protection. You have been brought in to analyze the customer environment and make recommendations. You suggest creating a data center at a remote location and actively replicating data to it.
What are the implications of adding the third data center to the data network? (Select two)

A) The data network must support Open Stack
B) Jumbo Frames should be enabled
C) A new subnet must be added to interconnect the 3PAR arrays
D) 10 GbE links are needed to interconnect to HP 3PAR StoreServ Arrays
E) The data network must support converged enhanced ethernet

4. You need to ensure data integrity on physical disks within the proposed HP 3PAR StoreServ Storage array.
Which HP 3PAR StoreServ Storage component calculates the value of the disk T10 Data Integrity Feature (DIF)?

A) HP Service Processor
B) HP InServ Controllers CPUs
C) HP 3PAR Gen4 ASIC
D) Controller Cache Algorithm

5. 2 DataCenters, FC network was grown -> more than 200 ports per Fabric, FC Switches 8-40 ports, Each in dual redundant layout.
The Goals are:
A) Customer should consolidate to latest technology
B) FC Connection between DC needs to be encrypted, scale beyond 300 ports, with least Management

A) HP SN8000B SAN Director
B) HP SN8000C Director
C) HP SN 9500C Director
D) HP DC SAN Director

Solutions: