Pass with professional HPE7-A11 actual quiz materials

HP HPE7-A11 Exam Overview:

HP HPE7-A11 Exam Syllabus Topics:

HPE Network Campus Access Professional Architect Sample Questions:

1. A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
Based on the best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?

A) 10G SFP+ LC LRM 220 m MMF Transceiver
B) 10G SFP+ LC SR 300 m MMF Transceiver
C) 10G BASE-T SFP+ RJ-45 30 m Cat6A Transceiver
D) 10G LC BiDi 40 km-D 1330/1270 XCVR

2. A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of 'No-Stair Inc." has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company is minimally engaged in their LAN refresh so the CTO of the company has shared the information below.
Current WLAN Infrastructure is based on the 802.11n "WIFI4Less" access-points series (both model 2013-INT (2.4 only internal antenna) and model 2019-EXT (dual-band external antenna only). These AP models are standalone without any centralized management. Last year 'No-Stair Inc.' ran a project called 'secure-it' ensuring that all needed network security was implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA.
Infrastructure to handle the increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs, with local breakout into different VLANs.
The CTO of 'No-Stair Inc.' understands the need for you to ask additional questions to deliver the design. The questions may be sent in written form and will be answered within two weeks.
What additional question needs to be answered in order to collect needed information for the WLAN design?

A) What type or fiber connection it used between the core and access layer switches?
B) Does the existing wired network support enough drops for an upgraded Wi-Fi Network?
C) Who Is the campus switch vendor?
D) Is there enough cooling in the MDF?

3. You are the lead network architect finalizing the Bill of Materials (BoM) for a new HPE Aruba Networking ClearPass Policy Manager (CPPM) deployment to support the following environment:
- 3,000 wired IoT devices using MAC authentication.
- 2,000 wireless IoT devices using MPSK.
- 12,000 corporate laptops, a mix of Windows 11 Desktop PCs and Surface Pro devices, joined to Active Directory and authenticating via EAP-TLS, with posture assessments required via a ClearPass client agent.
- 1,000 BYOD users, each onboarding 2-3 personal devices and receiving
certificates through ClearPass Onboard.
- Up to 2,500 guest users daily, using ClearPass Guest with sponsor-
based registration.
Which HPE Aruba Networking ClearPass license combinations most accurately reflects what should be included in the IRIS-generated Bill of Materials to support this deployment?

A) Access = 21,000, OnGuard = 15,000, Onboard = 1,000
B) Access = 22,000, OnGuard = 12,000, Onboard = 1,000
C) Access = 25,000, Device Insight = 12,000, Onboard = 3,000
D) Access = 15,000, OnGuard = 12,000, Onboard = 2,000

4. Manufacturing A.B.C. is an international, mid-sized company specializing in producing industrial equipment. They have been in the market for over two decades and have established themselves as a reputable player in their industry. However, due to rapid technological advancements, their current network infrastructure is outdated and struggling to keep up with the demands of modern manufacturing processes.
Manufacturing A.B.C.'s network is a mix of multi-vendor legacy wired and wireless components, causing frequent downtime and hampering their production efficiency. The aging equipment leads to slow data transfer rates, unreliable connectivity, and increased vulnerability to cyber threats.
Fiber Cabling should be also upgraded as mostly OM2 is being used.
Compounding the network issues, the recent departure of the CTO has left the company without a clear direction for the network refresh project. There is a lack of consensus among the management team regarding the scope, budget, and timeline for the upgrade.
The primary objectives of the manufacturing customer are as follows:
- Improve network performance and reliability to enhance production processes and minimize downtime
- Enhance network security to protect sensitive data and intellectual property
- Streamline communication and collaboration among different departments within the organization
- Ensure scalability to accommodate future growth and technology advancements Manufacturing A.B.C. seeks a comprehensive network refresh that includes the following components:
- Upgrading the wired infrastructure to high-speed Ethernet switches to support increased data transfer rates and reduce latency
- Implementing a robust wireless solution with enterprise-grade access points to provide seamless connectivity across the manufacturing facility
- Centralized network management tools to simplify administration and monitoring of the network Expectations:
The customer expects the network refresh project to be handled efficiently, with minimal disruption to their ongoing operations. They are looking for a reliable and experienced network solutions provider who can understand their unique manufacturing requirements and deliver a customized solution that aligns with their budget constraints. The manufacturing customer is keen on receiving clear project proposals and support in decision-making, given the recent change of the CTO.
Your role as a network solutions provider is to address their concerns, offer expert guidance, and present a well-defined plan to meet their objectives effectively.
You assume that the current network infrastructure does not have any wireless shadow IT equipment operated on the various floors/production sites, but you want to verify this. How could you find out if wireless shadow IT equipment is currently operational? (Choose two.)

A) Do an NMAP scan and document the outcome.
B) Do a ping sweep and document the hostnames/responses. Find out the connected switch port and walk to this location.
C) Check the LLDP/CDP neighbor table entries and locate these switches.
D) Follow the rack cabling and locate undocumented switches. If needed, shut down the affected switch ports.

5. A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client would like to ensure redundant RADIUS resources in each of their three geographical regions (AMER, EMEA, and APAC). A large office location is available in each region with sufficient VMware resources available.
- Each region has between 4,448 and 5,061 clients, all of which will need to do either 802.1X wired or wireless authentications as well as 802.1X authentication for a single personal device on Wi-Fi.
- All of the non-personal devices will also need to validate health with a local agent.
- A total of 500 guests are expected to be connected on average with a maximum of 700 simultaneous connections making use of Guest Portal for access to the Internet.
- TACACS authentication will also be configured for a total of 1200 evenly dispersed NADs.
How many OnGuard Licenses are required in this scenario?

A) 20,000
B) 10,000
C) 30,000
D) 15,000

Solutions: