[May 18, 2023] Latest NSE 7 Network Security Architect NSE7_EFW-6.4 Actual Free Exam Questions
NSE 7 Network Security Architect NSE7_EFW-6.4 Dumps Updated Practice Test and 124 unique questions
The Fortinet NSE7_EFW-6.4 (Fortinet NSE 7 - Enterprise Firewall 6.4) Exam is a certification exam designed to test the knowledge and skills of network professionals on the Fortinet Enterprise Firewall solution. The exam is a vendor-specific certification that focuses on the implementation and management of Fortinet firewalls. The certification validates the proficiency of candidates in configuring, deploying, and managing Fortinet security solutions for enterprise environments.
Passing the Fortinet NSE7_EFW-6.4 exam is a significant achievement as it demonstrates in-depth knowledge of network security, firewall policies, and SSL VPN. Obtaining a Fortinet Enterprise Firewall certification can open up new career opportunities for candidates, enabling them to obtain specialized positions in network security. The Fortinet NSE7_EFW-6.4 exam is an indication that individuals have the skills required to protect their organization's network and data from security threats.
NEW QUESTION # 17
View the exhibit, which contains a partial routing table, and then answer the question below.
Assuming all the appropriate firewall policies are configured, which of the following pings will FortiGate route?(Choose two.)
- A. Source IP address 10.72.3.27, Destination IP address 10.1.0.52.
- B. Source IP address10.73.9.10, Destination IP address 10.72.3.15.
- C. Source IP address 10.72.3.52, Destination IP address 10.1.0.254.
- D. Source IP address 10.1.0.24, Destination IP address 10.72.3.20.
Answer: A,C
NEW QUESTION # 18
Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)
- A. Add devices to FortiManager.
- B. Install configuration changes to managed devices.
- C. Import interface mappings from managed devices.
- D. Import policy packages from managed devices.
- E. Preview pending configuration changes for managed devices.
Answer: B,E
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/1200_install_to%20devices/0400_Install%20wizard-device%20settings.htm There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations.
Install: is used to install configuration changes from Device Manager or Policies & Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn't agree with the changes, cancel and modify them.
Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy & Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list.
Re-install policy: is used to perform a quick install of the policy package. It doesn't give the ability to preview the changes that will be installed to the managed device.
NEW QUESTION # 19
Refer to the exhibit, which contains the output of diagnose sys session list.
If the HA ID for the primary unit is zero (0), which statement about the output is true?
- A. The inspection of this session has been offloaded to the slave unit.
- B. This session cannot be synced with the slave unit.
- C. The master unit is processing this traffic.
- D. This session is for HA heartbeat traffic.
Answer: C
NEW QUESTION # 20
A FortiGate device has the following LDAP configuration:
The administrator executed the 'dsquery' command in the Windows LDAp server 10.0.1.10, and got the following output:
>dsquery user -samid administrator
"CN=Administrator, CN=Users, DC=trainingAD, DC=training, DC=lab"
Based on the output, what FortiGate LDAP setting is configured incorrectly?
- A. cnid.
- B. dn.
- C. username.
- D. password.
Answer: C
Explanation:
https://kb.fortinet.com/kb/viewContent.do?externalId=FD37516
NEW QUESTION # 21
A corporate network allows Internet Access to FSSO users only. The FSSO user student does not have Internet access after successfully logged into the Windows AD network. The output of the 'diagnose debug authd fsso list' command does not show student as an active FSSO user. Other FSSO users can access the Internet without problems. What should the administrator check? (Choose two.)
- A. The student workstation's IP subnet must be listed in the CA's trusted list.
- B. The user student must not be listed in the CA's ignore user list.
- C. At least one of thestudent's user groups must be allowed by a FortiGate firewall policy.
- D. The user student must belong to one or more of the monitored user groups.
Answer: B,C
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD38828
NEW QUESTION # 22
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Which statements about this debug output are correct? (Choose two.)
- A. The negotiation is using AES128 encryption with CBC hash.
- B. The remote gateway IP address is 10.0.0.1.
- C. The initiator has provided remote as its IPsec peer ID.
- D. It shows a phase 1 negotiation.
Answer: C,D
NEW QUESTION # 23
An administrator added the following Ipsec VPN to a FortiGate configuration:
configvpn ipsec phasel -interface
edit "RemoteSite"
set type dynamic
set interface "portl"
set mode main
set psksecret ENC LCVkCiK2E2PhVUzZe
next
end
config vpn ipsec phase2-interface
edit "RemoteSite"
set phasel name "RemoteSite"
set proposal 3des-sha256
next
end
However, the phase 1 negotiation is failing. The administrator executed the IKF real time debug while attempting the Ipsec connection. The output is shown in the exhibit.
What is causing the IPsec problem in the phase 1 ?
- A. NAT-T settings do not match
- B. The incoming IPsec connection is matching the wrong VPN configuration
- C. The pre-shared key is wrong
- D. The phrase-1 mode must be changed to aggressive
Answer: C
NEW QUESTION # 24
Examine the output of the 'diagnose ips anomaly list' command shown in the exhibit; then answer the question below.
Which IP addresses are included in the output of this command?
- A. Those whose traffic matches a DoS policy.
- B. Those whose traffic matches an IPS sensor.
- C. Those whose traffic exceeded a threshold of a matching DoS policy.
- D. Those whose traffic was detected as an anomaly by an IPS sensor.
Answer: A
NEW QUESTION # 25
Examine the output of the 'diagnose debug rating' command shown in the exhibit; then answer the question below.
Which statement are true regarding the output in the exhibit? (Choose two.)
- A. The TZ value represents the delta between each FortiGuard server's time zone and the FortiGate's time zone.
- B. A server's round trip delay (RTT) is not used to calculate its weight.
- C. There are three FortiGuard serversthat are not responding to the queries sent by the FortiGate.
- D. FortiGate will send the FortiGuard queries to the server withhighest weight.
Answer: A,D
NEW QUESTION # 26
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher priority value than the default route using port1.
- B. It is disabled in the FortiGate configuration.
- C. It has a higher distance than the default route using port1.
- D. It has a lowerpriority value than the default route using port1.
Answer: C
NEW QUESTION # 27
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
- B. The state of the remote BGP peer isOpenConfirm.
- C. Local BGP peer received a prefix fora default route.
- D. BGP peers have successfully interchangedOpenandKeepalivemessages.
Answer: C,D
NEW QUESTION # 28
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device. The administrator decides to enable the setting link-failed-signal to fix the problem.
Which statement about this setting is true?
- A. It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- B. It sends a link failed signal to all connected devices.
- C. It forces the former primary device to shut down all its non-heartbeat interfaces for one second, while the failover occurs.
- D. It disabled all the non-heartbeat interfaces in all HA members for two seconds after a failover.
Answer: C
NEW QUESTION # 29
Examine the output from the 'diagnose vpn tunnel list' command shown in the exhibit; then answer the question below.
Which command can be used to sniffer the ESP traffic for the VPN DialUP_0?
- A. diagnose sniffer packet any 'port 4500'
- B. diagnose sniffer packet any 'host 10.0.10.10'
- C. diagnose sniffer packet any 'esp'
- D. diagnose sniffer packet any 'port 500'
Answer: A
Explanation:
NAT-T is enabled. natt: mode=silent Protocol ESP is used. ESP is encapsulated in UDP port 4500 when NAT-T is enabled.
NEW QUESTION # 30
Examine the output from the 'diagnose vpn tunnel list' command shown in the exhibit; then answer the question below.
Which command can beused to sniffer the ESP traffic for the VPN DialUP_0?
- A. diagnose sniffer packet any 'port 4500'
- B. diagnose sniffer packet any 'host 10.0.10.10'
- C. diagnose sniffer packet any 'esp'
- D. diagnose sniffer packet any 'port 500'
Answer: A
Explanation:
Explanation
NAT-Tis enabled. natt: mode=silentProtocol ESP is used. ESP is encapsulated in UDP port 4500 when NAT-T is enabled.
NEW QUESTION # 31
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The CA cannot reach the FortiGate with the IP address192.168.12.232.
- B. The FortiGate cannot resolve the name of the workstation.
- C. The CA cannot resolve the name of the workstation.
- D. The remote registry service is not running in the workstation 192.168.12.232.
Answer: D
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548
NEW QUESTION # 32
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=00.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1) tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2) tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2,
[10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2 Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?
- A. port2.
- B. port!
- C. port3.
- D. Both portl and port2.
Answer: A
NEW QUESTION # 33
Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)
- A. Add devices to FortiManager.
- B. Install configuration changes to managed devices.
- C. Import interface mappings from managed devices.
- D. Import policy packages from managed devices.
- E. Preview pending configuration changes for managed devices.
Answer: B,E
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/1200_install_to%20devices/0400_Install%20wizard-device%20settings.htm
There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations.
Install: is used to install configuration changes from Device Manager or Policies & Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn't agree with the changes, cancel and modify them.
Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy & Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list.
Re-install policy: is used to perform a quick install of the policy package. It doesn't give the ability to preview the changes that will be installed to the managed device.
NEW QUESTION # 34
Which statement about the designated router (DR) and backup designated router (BDR) in an OSPF multi-access network is true?
- A. Only the DR receives link state information from non-DR routers.
- B. Non-DR and non-BDR routers will form full adjacencies to DR and BDR only.
- C. BDR is responsible for forwarding link state information from one router to another.
- D. FortiGate first checks the OSPF ID to elect a DR.
Answer: B
NEW QUESTION # 35
Which two statements about an auxiliary session are true? (Choose two.)
- A. With the auxiliary session setting enabled, two sessions will be created in case of routing change.
- B. With the auxiliary session setting disabled, for each traffic path, FortiGate will use the same auxiliary session.
- C. With the auxiliary session disabled, only auxiliary sessions will be offloaded.
- D. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.
Answer: B,C
NEW QUESTION # 36
......
The Fortinet NSE7_EFW-6.4 certification is recognized globally as a validation of a professional's expertise in enterprise firewall technologies. This certification is a valuable asset for security professionals who want to demonstrate their skills and knowledge to potential employers. Additionally, the certification provides a competitive advantage in the job market, enabling certified professionals to secure higher-paying positions.
Verified NSE7_EFW-6.4 dumps Q&As - 100% Pass from ActualTestsQuiz: https://pdfexamfiles.actualtestsquiz.com/NSE7_EFW-6.4-test-torrent.html
