Get Special Discount Offer on HPE6-A66 Dumps PDF [UPDATED Sep-2022]
PDF Download HP Test To Gain Brilliante Result!
NEW QUESTION 36
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. ceiling height
- B. number of users
- C. square footage
- D. types of users and their devices
- E. number of buildings
Answer: A,C
NEW QUESTION 37
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan and Building View
- B. Define the appropriate dimensions of each object in a Floorplan View
- C. Define the appropriate dimensions of a Floorplan View
- D. Define the appropriate dimensions of each room in a Floorplan View
Answer: B
NEW QUESTION 38
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 39
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11h
- B. 802.11r
- C. 802.11 ax
- D. S02.11V
Answer: C
NEW QUESTION 40
A network architect needs to plan a new wireless network
- A. Airwave, Central, and Windows only
- B. Central only
- C. Airwave and Central only
- D. Airwave, Central, Windows, Mac OSX, and Linux
Answer: C
NEW QUESTION 41
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. RS-232
- B. RJ-45
- C. USB-A
- D. Micro-B USB
Answer: D
NEW QUESTION 42
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- B. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- C. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- D. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
Answer: A
NEW QUESTION 43
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. roaming between APs
- D. encountering RF interference by devices
- E. providing consistent performance on all available channels
Answer: A,E
NEW QUESTION 44
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 387s
- B. Multi-mode fiber between campus switches
- C. Two outdoor AP 510s
- D. Two outdoor AP 367s
Answer: D
NEW QUESTION 45
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Two 7030 mobility controllers in a cluster
- B. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- C. Two 7205 mobility controllers in a cluster
- D. A standalone 7008 controller per floor
Answer: B
NEW QUESTION 46
Which AP mode allows an AP to operate autonomously?
- A. OCAP
- B. IAP
- C. RAP
- D. AM
Answer: A
NEW QUESTION 47
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Define the appropriate properties in the Building View
- B. Define the appropriate properties in the Network View
- C. Spit the Building View into two Floorplan Views
- D. Create a Region in the Floorplan View
Answer: A
NEW QUESTION 48
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Paint the APs to match the ceilings or walls
- B. Order Aruba AP covers for the APs
- C. Place the APs above the ceiling and behind the walls
- D. Place a strip of tape over the LEDs
Answer: C
NEW QUESTION 49
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Site-1
- B. Catalog
- C. Start Page
- D. Topology
Answer: A
NEW QUESTION 50
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
- B. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- C. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
- D. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
Answer: B
NEW QUESTION 51
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Nomadic devices
- B. Stationary devices
- C. Somewhat mobile devices (SMD)
- D. Highly mobile devices (HMD)
Answer: A
NEW QUESTION 52
Which feature does the Aruba AP 555 support? (Select two.)
- A. three radios
- B. 802.11ac and lower standards only
- C. weather proof and temperature hardened
- D. high density indoor locations
- E. desk wall plate mounted
Answer: B,D
NEW QUESTION 53
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. One 2930M 48-port POE+ switch
- B. Two 2930F 24-port POE+ switches
- C. Two 2930M 24-port POE+ switches
- D. One 3810M 40G 8 HPE Smart Rate switch
Answer: A
NEW QUESTION 54
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Active
- B. Spectrum clearing
- C. Virtual
- D. Passive
Answer: A
NEW QUESTION 55
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. QSFP+ LC
- B. SFP
- C. SmartRate
- D. QSFP28
Answer: C
NEW QUESTION 56
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 8300 series
- B. 5400R series
- C. 6300 series
- D. 3810M series
Answer: D
NEW QUESTION 57
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 60 MHZ
- B. 10MHZ
- C. 20 MHz
- D. 40 MHZ
Answer: A
NEW QUESTION 58
......
HPE6-A66 Dumps are Available for Instant Access: https://pdfexamfiles.actualtestsquiz.com/HPE6-A66-test-torrent.html
